Mazda 323 Workshop Manual Supplement page 117

TRANSFER PUMP CONTROL
SYSTEM
2. Remove the service hole cover of the transfer pump.
3. Disconnect the transfer pump connectors.
4. Disconnect the fuel hose.
5. Remove the transfer pump.
Caution
l
Install a new seal rubber.
6. Install in the reverse order of removal.
03UOFX-626
Disassembly / Assembly
Caution
l
Prevent contaminants from entering the transfer pump,
I. Disassemble in the order shown in the figure.
2. Assemble in the reverse order of disassembly.
3. Verify that the transfer pump operates
correctly
after assembling it.
EAL RUBBER, REPLACE
1 . Fuel filter
2. Rubber mount
3. Transfer pump
4. Fuel hose
5. Transfer pump
switch
Ft-14