Mazda 323 Workshop Manual Supplement page 84

lNSTAL&ATlON
B2
03UOSX-839
93G032-76:
9313082-738
/
\
\\ I
Crossmember
1. Install the crossmember.
Tightening torque:
93-107 Nm (9.5-l I .9 m-kg, 69-79 f&lb)
A/c compressor
1. Install the A/C compressor.
Tightening torque:
24-35 Nom (2.4-3.6 m-kg, 17-26 ft-lb)
P/S oil pump and bracket
I. Install the P/S oil pump and bracket.
Tightening torque:
37-52 Nm (3.8-5.3 m-kg, 27-38 ft-lb)
Drive belt
I. Install the P/S and/or A/C drive belt.
2. Adjust the drive belt deflections. (Refer to page 82-2)
Air pipe
1. Install a new gasket and install the air pipe.
Tightening torque:
19-25 N-m (1.9-2.6 m-kg, 14-19 Mb)
Intercooler and air pipe assembty
t . Lift the intercooler and air pipe assembly from the bottom
of the vehicle, and install hose @ in pipe @ .
2. Install and tighten the mounting bolt and nut.
Tightening torque:
7.8-l 1 Nom (80-l 10 cm-kg, 69-95 in-lb)
3. Tighten hose clamp 0.
B2-31