Intercooler Bracket - Mazda 323 Workshop Manual Supplement

INSTALLATION
5. Align the engine mount member to the No.1 and No.2 en-
gine mount boIts, and loosely tighten the nuts.
6. k-&all and tighten the engine mount member bolt and nuts.
Tightening torque:
64-89 N-m (6-509.1
m-kg, 47-66 Mb)
7. Tighten the No.1 and No.2 engine mount nuts.
Tightening torque:
37-52 N-m (3.8-5.3 m-kg, 27-38 ft-lb)
8. Tighten bolts @ in two or three steps in the order shown.
Tightening torque:
43-61 Nom (4.4-6.2 m-kg, 32-43 ft-lb)
9. Tighten nuts @.
Tightening
torque:
67-93 N-m (6.8-9.5 m-kg, 49-69 f%(b)
03UOBX-828
IO. Tighten the No.3 engine mount nuts @.
93G052-731
93GOB2-73;
Tightening torque:
74-103 N-m (7.5-10.5 m-kg, 54-76 ft-Ib)
11. Tighten No.3 engine mount nut @.
Tightening torque:
67-93
N-m (6.8-9.5 m-kg, 49-69
ftdb)
12. Install the dynarpic damper.
Tightening torque:
55-80 Nom (5.6-8-2 m-kg, 41-59 ft-lb)
13. Remove the chain hoist.
Intercooler bracket
1,
Install the intercooler bracket.
Tightening torque:
19-25
him (1.9-2.6 m-kg, 14-I 9 ft-lb)