YASKAWA VS mini J7 Series Instruction Manual page 30

Description of Status Indicator LEDs
There are two LEDs on the middle right section of the face of the VS mini.
The inverter status is indicated by various combinations of ON, BLINKING
and OFF LEDs. RUN indicator and status indicator on the
have the same function.
: ON : BLINKING (Long Blinking)
Operation Ready
(During Stop)
RUN ALARM
RUN ALARM
(Green) (Red)
For details on how the status indicator LEDs function at inverter faults, refer
to Section 8 "FAULT DIAGNOSIS AND CORRECTIVE ACTIONS" on
page 87. If a fault occurs, the ALARM LED lights.
The fault can be reset by turning ON the fault reset signal (or pressing
NOTE
STOP
key on the digital operator) with the operation signal OFF or
RESET
by turning OFF the power supply. If the operation signal is ON, the
fault cannot be reset by the fault reset signal.
30
: BLINKING
Ramp to Stop Normal Operation
RUN ALARM RUN ALARM
RUN
button
: OFF