Mounting/Removing Components - YASKAWA VS mini J7 Series Instruction Manual

Mounting / Removing Components
Removing and Mounting Digital Operator and Covers
• Removing front cover
Use a driver to loosen the screw
on the front cover surface to
direction 1 to remove it. Then
press the right and left sides to
direction 2 and lift the front cover
to direction 3.
• Mounting front cover
Insert the tab of the upper part of
the front cover into the groove of
the inverter, and press the lower
part of the front cover onto the
plastic case until the cover snaps
shut. Then, tighten the screws.
• Removing option cover
After removing front cover,
remove the option cover to
direction 2 with section A as a
supporting point.
• Mounting option cover
Mount the terminal cover in the
descending order of the above
procedure for removal.
• Removing upper/bottom covers
After removing front cover, lift
the covers to direction 1.
• Mounting upper/bottom covers
Mount the front cover in the
descending order of the above
procedure for removal.
19