Sending Multiple Originals From The Platen Glass - Konica Minolta bizhub C300 Network Fax Operations

3

Sending multiple originals from the platen glass

Originals that cannot be sent with the ADF can be sent by using the platen
glass.
1
If the fax screen is not displayed, press [Fax] on the control panel to
open the fax screen.
2
Specify a destination.
3
Set the desired functions as necessary.
4
Place the original on the platen glass.
Press [Scan Setting] - [Separate Scan]
- [OK] and then press [Start].
5
Place the next original on the platen glass and press [Start].
– Repeat this procedure until all originals to be sent have been
scanned.
The scanned originals are stored in memory.
6
Press [Finish].
The Document reading mode is canceled.
7
Press [Start].
Transmission begins.
3-14
Transmission
Network Fax