Tx Report; Manual Printout; Automatic Printout - Konica Minolta bizhub C300 Network Fax Operations

11
11.3

TX report

Manual printout

The TX Result Report Check screen appears at the transmission if [ON] is
selected at [Report Settings]-[TX Report] by the Utility Mode.
Press [YES] to print the TX result report. Press [NO] to not print the report.
For details, see "Report settings" on page 10-69.

Automatic printout

Automatic printout can be set to [ON], [If TX Fails] or [OFF] with [TX Report]
at [Report Settings] of Utility Mode. For details, see "Report settings" on
page 10-69.
*
The actual reports may be different from the reports in this manual.
Item
No.:
Destination:
Start Time:
Time:
Prints:
11-10
Description
Serial numbers are assigned to each transmission and reception.
The following is shown.
• Name when name is registered in abbreviated dialing or entry list
• Destination
The time at which communication started is shown.
Fixed in "-:-:-".
The number of pages transmitted is shown. In the case of memory trans-
mission, the number of pages able to be transmitted and the total
number of pages are shown in the form of a fraction.
Explanation of reports and lists
Network Fax