Transmission applications
3
Press [TX Stamp].
–
To release the setting, press [TX Stamp] again.
4
Press [OK].
The Scan Setting screen will be restored.
5
Press [OK].
The Fax screen will be restored.
6
Set other functions if necessary.
–
See "Setting transmission conditions" on page 3-19 for information
about setting functions in the fax screen.
–
See "Application functions overview" on page 7-5 for information
about setting functions in the Scan Setting or Comm. Setting
screen.
7
Designate the destination.
–
See "Method for specifying addresses" on page 3-31 for
designating the destination.
8
Set the original document.
–
See "Placing the original on the machine" on page 3-12 for
information about setting the document.
9
Press [Start].
The FK-502 stores the document in memory before starting
transmission.
Network Fax
7
7-31