Maintenance Code (Default: 1111 / 111111); Master Code (Default: 1234 / 123456) - Magellan MG-6060 Programming Manual

Maintenance Code (Default: 1111 / 111111)

The Maintenance code is similar to the Installer code. It can be used to enter programming mode (see Entering Programming Mode on page 7),
which allows you to program all the features, options and commands except for the Magellan console's communication settings (sections [100] to
[154]) as well as any user codes. The Maintenance code can be 4 or 6 digits in length (see section [090] option [1] on page 12) where each digit can
be any value from 0 to 9. See section [182] on page 26 to change the default code.

Master Code (Default: 1234 / 123456)

With the System Master code a user can use any arming method and can program user codes. The System Master code can be 4 or 6 digits in
length (see section [090] option [1] on page 12), where each digit can be any digit from 0 to 9. The System Master code cannot be changed by the
installer or maintenance code, but it can be reset to default. See section [200] on page 26 to reset to default.
Magellan 5