Things You Should Know; About This Programming Guide; Conventions; Installer Code (Default: 0000 / 000000) - Magellan MG-6060 Programming Manual

Things You Should Know

About This Programming Guide

This programming guide should be used in conjunction with the Magellan Reference & Installation Manual which can be downloaded
from our website at www.paradox.ca. Use this guide to record the settings programmed for this console.

Conventions

This symbol designates a warning or important information.
This symbol designates a suggestion or reminder.
This symbol designates a reference to another section, manual or guide.
This symbol designates a feature that can also be programmed in the Installer menu which can be accessed by pressing
[menu] and then entering your [
pressed in order to access the feature once in the Installer menu. For example:
= Once in the Installer menu, press the [4] key and then press the [6] key to access the desired feature.
[4] [6]
Refer to the Installer Menu Overview on the back cover for more information on accessing and using the Installer menu.

Installer Code (Default: 0000 / 000000)

The Installer code is used to enter programming mode (see Entering Programming Mode on page 3), which allows you to program all the
features, options and commands of the Magellan console except user codes. The Installer code can be 4 or 6 digits in length (see section
[090] option [1] on page 5) where each digit can be any value from 0 to 9. See section [181] on page 11 to change the default code.

Maintenance Code (Default: 1111 / 111111)

The Maintenance code is similar to the Installer code. It can be used to enter programming mode (see Entering Programming Mode
on page 3), which allows you to program all the features, options and commands except for the Magellan console's communication
settings (sections [100] to [154]) as well as any user codes. The Maintenance code can be 4 or 6 digits in length (see section [090]
option [1] on page 5) where each digit can be any value from 0 to 9. See section [182] on page 11 to change the default code.

Master Code (Default: 1234 / 123456)

With the System Master code a user can use any arming method and can program user codes. The System Master code can be 4 or
6 digits in length (see section [090] option [1] on page 5), where each digit can be any digit from 0 to 9. The System Master code
cannot be changed by the Installer or Maintenance code, but it can be reset to default. See section [200] on page 11 to reset to default.

Decimal and Hexadecimal Values

Hexadecimal only
values:
[1] = A
[2] = B
[3] = C
[4] = D
[5] = E
[6] = F
Decimal and
Hexadecimal
Values:
Keys [0] to [9] = 0
to 9
2
]. The icon will then be followed by the path or buttons that have to be
INSTALLER CODE
Figure 1: Decimal and Hexadecimal Values
Programming Guide