Mounting Magellan On The Wall - Magellan MG-6060 Programming Manual

Mounting Magellan on the Wall

Figure 13: Mounting Magellan onto the Wall Plate
To mount the wall plate:
1. Place the wall plate on the desired spot of the wall.
2. Drill and insert the screws into the holes labeled A at left.
To mount the Magellan console:
1. Place the console back plate flush against the mounted wall plate.
2. Slide the Magellan's open slots labeled D (see Inset 1 below) onto the wall plate's tabs labeled B.
3. Gently apply downward pressure to insert the wall plate's tabs into Magellan's open slots.
4. Insert two screws through the wall plate's screw holes labeled C and into Magellan's back plate
screw holes labeled E (see Inset 1 below). This will secure the console to the wall.
Inset 1: Magellan's Backplate
B
A (x4)
D D
C
E
44 Programming Guide