Things You Should Know; About This Programming Guide; Conventions; Installer Code (Default: 0000 / 000000) - Magellan MG-6060 Programming Manual

All-in-one wireless security system

Hide thumbs Also See for MG-6060:

Table of Contents

Things You Should Know

This programming guide should be used in conjunction with the Magellan Reference & Installation Manual which can be downloaded from our Web

site at www.paradox.ca. Use this guide to record the settings programmed for this console.

This symbol designates a warning or important information.

This symbol designates a suggestion or reminder.

This symbol designates a reference to another section, manual or guide.

This symbol designates a feature that can also be programmed in the Installer menu which can be accessed by pressing [menu] and then

entering your [

INSTALLER CODE

once in the Installer menu. For example:

= Once in the Installer menu, press the [4] key and then press the [6] key to access the desired feature.

[4]

[6]

Refer to the Installer Menu Overview on the back cover for more information on accessing and using the Installer menu.

The Installer code is used to enter programming mode (see Entering Programming Mode on page 7), which allows you to program all the features,

options and commands of the Magellan console except user codes. The Installer code can be 4 or 6 digits in length (see section [090] option [1] on

page 12) where each digit can be any value from 0 to 9. See section [181] on page 26 to change the default code.

]. The icon will then be followed by the path or buttons that have to be pressed in order to access the feature

Programming Guide

Table of Contents