Telephone Line Connections - Magellan MG-6060 Programming Manual

Telephone Line Connections

Back view of the Magellan console.
To connect the telephone line
directly to the console:
1. Connect a RJ31X to the -1,
R
1, and terminals as
RING TIP
shown at right.
2. Connect the telephone
company wires and the home
telephone to the RJ31X.
Magellan
Figure 4: Telephone Line Direct Connect
-
T
Telephone Line Connection Note
The Magellan console must be able to seize the telephone line and place a
call in an emergency situation. It must be able to do this even if other
equipment (telephones, answering machines, computer modems, etc.)
already has the line in use. To do so, the Magellan console must be
connected to a properly installed RJ31X (or RJ38X) jack that is electrically
in series with and ahead of all other equipment attached to the same
telephone line. Proper installation is depicted in the diagram below. If you
have any questions concerning these instructions, you should consult your
telephone company or a qualified installer about installing the RJ31X (or
RJ38X) jack and the Magellan console for you.
35