Table of Contents
Advertisement
4.2
DPT Features
To select a desired CLIP number for one time
1
2
7
1
3
3
desired CLIP number + #
4
CO
5
phone number
Condition
• System programming is required to assign the numbers for a CLIP / COLP number.
However, the number actually sent to the called or calling party depends on the contract of
your ISDN network suppliers.
Programming References
• System Programming — Installation Manual Addendum
[419] Subscriber Number Assignment
[623] CLIP / COLP Number Assignment for Extension
[624] CLIP / COLP Number Assignment for ISDN Extension
Feature References
Calling Line Identification Restriction (CLIR)
Connected Line Identification Restriction (COLR)
1. Lift the handset or press the SP-PHONE/MONITOR button.
2. Dial the feature number (711) and 3.
1
3. Dial the desired CLIP number and press #.
• You will hear a confirmation tone.
4. Press a CO button or dial the line access code (0 or 81 through 88).
5. Dial the phone number.
C
55
Advertisement
Table of Contents
