Table of Contents
Advertisement
4.2
DPT Features
To talk to the third party by holding the current call
1
HOLD
Conditions
• Class of Service programming determines which extensions can perform Whisper OHCA.
• The Whisper OHCA receiving extension display shows the calling extension's number or
name for 5 seconds in 10 second intervals.
• You can select to receive a Call Waiting tone, OHCA, Whisper OHCA or none of these at
your extension.
• If the Whisper OHCA sender does not use a KX-T7400 series telephone, it will work as
OHCA. If the receiver does not use a KX-T7400 series telephone, it may not work properly.
(E.g. The announcement may be heard by the other party.)
• The receiving mode may shift depending on the settings on each telephone or the telephone
type.
<Example> If the user selects 3 (Whisper OHCA mode);
– If using a KX-T7436 handset ............................Whisper OHCA
– If using a KX-T7436 SP-PHONE......................Call Waiting
– Other...................................................................Call Waiting
• It is possible to enable the Whisper OHCA by any type of telephones by system
programming. However, it may not work properly. (E.g. the announcement may be heard
by the other party.)
• The Whisper OHCA sender will receive a ringback tone in the following cases.
– If the receiver presses the TRANSFER, CONF, SP-PHONE, DSS or CO button.
– If the party who is talking with the receiver disconnects the line or presses the
TRANSFER, CONF or HOLD button.
Programming References
• System Programming — Installation Manual Addendum
[519] Off-Hook Call Announcement (OHCA)
[990] System Additional Information, Field (61)
Feature References
Busy Station Signaling (BSS)
Call Waiting
Off-Hook Call Announcement (OHCA)
If you hear two beeps and voice announcement;
1. Press the HOLD button.
• The current call is placed on hold.
• The INTERCOM indicator light flashes green slowly.
W
23
Advertisement
Table of Contents
