Table of Contents
Advertisement
C
To select a desired CLIP number for one time
1
2
3
desired CLIP number + #
4
line access code
5
phone number
Condition
• System programming is required to assign the numbers for a CLIP / COLP number.
However, the number actually sent to the called or calling party depends on the contract of
your ISDN network suppliers.
Programming References
• System Programming — Installation Manual Addendum
[419] Subscriber Number Assignment
[623] CLIP / COLP Number Assignment for Extension
[624] CLIP / COLP Number Assignment for ISDN Extension
Feature References
Calling Line Identification Restriction (CLIR)
Connected Line Identification Restriction (COLR)
62
6.2
SLT and ISDN Telephone Features
1. Lift the handset.
2. Dial the feature number (711) and 3.
3. Dial the desired CLIP number and press #.
• You will hear a confirmation tone.
4. Dial the line access code (0 or 81 through 88).
5. Dial the phone number.
Advertisement
Table of Contents
