Table of Contents
Advertisement
User Manual
l NTP Setting:
NTP: NTP (Network Time Protocol) means to get current time from remote server via network to as DVR system time. Please make sure your DVR can access internet before use NTP.
The default sever is hk.pool.ntp.org, port: 123, time zone is GMT+08:00.
Time Server: The default time serve can automatically sync time succeed if your network is OK. If the default time server cannot work, you can set the time server which can be connected.
Port: Time server port. Current NTP only support TCP transmission.
Time Zone: System support 26 time zones. User can set according to current zone. Including:
London: GMT+0, Berlin: GMT+1, Cairo: GMT+2, Moscow: GMT+3, New Delhi: GMT + 5, Bangkok: GMT + 7, Hong Kong Beijing: GMT + 8, Tokyo: GMT + 9,
Sydney: GMT + 10, Hawaii: GMT - 10, Alaska: GMT - 9, Pacific time: GMT - 8, American mountain time: GMT - 7, the United States central time: GMT - 6,
the United States eastern standard time: GMT - 5, Atlantic time: GMT - 4, Brazil: GMT - 3, Atlantic - central: GMT - 2.
Update cycle: The unit is hour, day or week. The effective range is 1-60. Select " Auto update" button, the system will update when cycle time out. Also you can select " Manually update"
button to upgrade immediately.
4.7.3 Output Setting
Enter into " Main Menu" -> " System Setup" -> " Output" interface as below:
eLineTechnology.com
50
Advertisement
Table of Contents
