Table of Contents
Advertisement
User Manual
3. To input name and password, you can left click mouse. It will pop out software keyboard. Right click mouse to exit.
Note: For the sake of safety, please change the default password immediately.
4.1.3 System Lock
When the system is in login status, user continuous left click the mouse, through " Main Menu" -> " System
Setup" -> " General" to access general setting interface, set the lock function and time in combobox, if there is
no operation in the automatic locking time (system default is 3 minutes), the system will automatically lock.
You can also press " login/lock" on the remote controller or front panel or click the icon "
to manual lock the system.
4.1.4 Main Menu
After user log in successfully, and click the " MENU" on the remote controller or the front panel, or click
the icon "
" in status bar, or right click the mouse and choose the " Main Menu" to access the main menu
(interface as below); the main menu from left to right is: data inquiry, backup management, record setup, alarm
setup, system setup, HDD management, Information inquiry, system maintenance, and logout/shutdown/reboot.
4.1.5 Status Bar
When DVR boot, the status bar at bottom of screen display as below picture:
Operation as below:
1. Menu icon: Single click "
" in login status to access the main menu.
" in status bar
34
eLineTechnology.com
Advertisement
Table of Contents
