Table of Contents
Advertisement
User Manual
PTZ Setting
Network
Setting
System Setup
Input Settings
HDD Management
Basic Info.
PTZ protocol, address code, channel copy function.
Network Setting
DHCP, IP address, reserve IP setting, port setting, multicast setting.
1. Record type: all, manual, schedule, motion, alarm;
2. Code stream type: VBR, CBR;
3. Definition: CIF, QCIF;
4. Image quality: 6 level (highest, higher, high, middle, low, lowest);
Sub-Stream
5. Frame rate: 2-25 fps adjustable;
6. Code rate: 100K, 256K, 512K, 768K, 1M (CIF); 45K, 60K, 90K, 128K, 256K (QCIF);
7. Audio: enable indicate audio is available when network transmission, otherwise
don' t have audio when network transmission.
DDNS
Choose DDNS server, set user name and password for analysis, DDNS test.
PPPOE
Set user name and password for PPPOE or 3G dial up.
Email Setting
Set server, sender name, password, sender address, receiver address, port, Email test.
Platform server reserved function.
Platform Server
Enable the compound channel and set the parameter.
Compound Channel
Inputting resolution, channel copy function.
Display status and information of each HDD/USB/burner, format the HDD/log , try to use HDD and set attribution.
30
eLineTechnology.com
Advertisement
Table of Contents
