E-line ELI-PRO3 series User Manual page 31

HDD Group
HDD
Management
SMART
System Information
Record Status
Alarm Status
Information
Inquiry
Online Status
Log Inquiry
Input State
Quick Settings
User Management
System
Maintenance
Reset To Default
Upgrade Management
Schedule Restart
Set the HDD and record channel belong to different group, display the HDD total capacity, free capacity, record time.
Query the HDD model, serial number, firmware version, temperature, health status and SMART attribution.
Query and display the device model, software version, SCM version, IP address, MAC address, language, resolution.
Display the record status of each channel (record type, image quality, definition, audio, Code rate).
Display the alarm status of each channel (sensor alarm, motion alarm, video loss, video shield), HDD alarm, network
disconnect alarm, temperature alarm and alarm clear.
Display the device online information (online user, login IP, login time).
Inquiry the system log, display the log quantity and backup log.
Display the audio/video source type (video/audio status).
Quick set time, network setting, HDD information inquiry and format, local code stream and network stream, manual record.
1. Add new user, delete user/group;
2. Change local/remote user account and authority. Support remote user authorities: remote preview, parameter setup,
remote playback, remote backup, log inquiry, voice talk, remote upgrade, user binding IP and MAC address.
To default setting: general setting, output setting, coding parameter, schedule record, alarm setting , network setting,
COM setting, timing restart, PTZ setting.
FTP Upgrade, USB Upgrade.
Enable system schedule function to set the restart time.
31
Net DVR
eLineTechnology.com