Power On Wizzard - E-line ELI-PRO3 series User Manual

2. System login/lock icon: Single click "
3. Alarm status icon: Single click "
4. Audio icon: Single click " " to enable or unable voice.
5. Channel preview order adjust icon: Single click "
6. Display/hide status bar: Single click " hide" to hide the status bar, move mouse point to the bottom of interface and single click " display" to display the status bar.
7. Quick playback icon: Single click icon "

4.2 Power on Wizzard

After device boot, you can do simple configuration through power on wizzard to make DVR working normal and the interface as below:
Setting method: access " System Setup" -> " General" , then choose the " Display power on wizzard" and save, next time boot will prompt whether access power on wizzard.
Note: please confirm the HDD has connected with SATA port before use initial start wizard.
The simple configuration in power on wizzard as below:
1. Ensure whether access the power on wizzard, choose " Yes" to access.
2. Authority filter, input the password (the default is 888888).
3. System time setting, click save after set finish and choose " Next" .
4. Network setting, you can set the IP, gateway, DNS, command port, HTTP port;
click " Save" after set finish and choose " Next" .
5. HDD management, choose the HDD number which you want format then click " Format" , after
pop-up " Are you sure to format HDD?" , click " Yes" to format the HDD, after finish choose " Next" .
Note: if you choose " Format log" and choose the 1st HDD in list when format HDD, then the log can be formatted, otherwise the log can' t be formatted.
6. Input settings, set the definition of input. If parameters of other channels are the same, you can click " Copy" to copy the parameter setting to other channels. Then click " Save" button
to continue.
7. Coding parameter, click " Save" after set the local stream and network stream, if other channels have same setting, choose " Copy" to access, then choose which channel need copy,
click " Save" then choose " Next" .
8. Record setting, choose the channel which you want enable manual record, click " Save" then choose " Finish" to exit power start wizzard.
" to access host after booting, single click "
" to access " alarm status" to query alarm information and clear alarm voice.
" to adjust the order of preview channels.
" to quick playback the before 5 minutes record.
" to lock the host.
35
Net DVR
eLineTechnology.com