4-Port 10-Gigabit Ethernet Modular Port Adapter With Xfp - Cisco ASR 9000 Series Installation Manual

Aggregation services router ethernet line card
Hide thumbs Also See for ASR 9000 Series:
Table of Contents

Advertisement

Modular Line Cards and Modular Port Adapters
Table 1-6
LED Label
STATUS

4-Port 10-Gigabit Ethernet Modular Port Adapter with XFP

The 4-Port 10-Gigabit Ethernet (GE) modular port adapter (MPA) provides four cages for XFP Ethernet
optical interface modules that operate at a rate of 10 Gbps. The four XFP modules can be 10GE
multimode or single mode connections.
MPA.
The MPA has two types of LEDs: an A/L (Active/Link) LED for each individual port and a Status LED
for the MPA as shown in
described in
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
1-34
2-Port 10-Gigabit Ethernet Modular Port Adapter LEDs (continued)
Color
State
Red
On
Off
Off
Green
On
Amber
On
Figure
1-17. The A/L LED indicates the status of the associated XFP port, as
Table
1-7.
Chapter 1
Cisco ASR 9000 Series Line Card Product Overview
Meaning
Port is enabled and the link is down.
Modular port adapter power is off.
Modular port adapter is ready and operational.
Modular port adapter power is on and good, and the
modular port adapter is being configured.
Table A-14
summarizes the optics and connectors used by the

Advertisement

Table of Contents
loading

Table of Contents