Cisco ASR 9000 Series Installation Manual page 38

100-Gigabit Ethernet Line Cards
100-Gigabit Ethernet Line Cards
•
•
•
1-Port 100-Gigabit Ethernet Line Card with CFP
The 1-Port 100-Gigabit Ethernet (GE) line card provides one CFP cage for an CFP Ethernet optical
interface module that operates at a rate of 100 Gbps. The CFP module can be a 100GE multimode
connection.
The 1-port 100 GE line card is available in either an -SE (Service Edge Optimized) or -TR (Packet
Transport Optimized) version. Both versions are functionally equivalent, but vary in configuration scale
and buffer capacity. The CFP cage has an adjacent Link LED visible on the front panel as described in
Status LEDs, page
Table 1-4
Table 1-4
Part Number
CFP-100G-LR4
CFP-100G-SR10
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
1-26
1-Port 100-Gigabit Ethernet Line Card with CFP, page 1-26
2-Port 100-Gigabit Ethernet Line Card with CFP, page 1-28
8-Port 100-Gigabit Ethernet Line Card with CPAK, page 1-30
3-2. Figure 1-11
lists the optics and connectors used by the 100 GE port on the 1-port 100 GE line card.
Cisco 100-Gigabit Ethernet CFP Modules for 1-port and 2-Port Line Cards
100-Gigabit Ethernet CFP Modules
100 GE long-reach over 4 WDM lanes (LR4)
optics (single-mode fiber)
100 GE over 10 short-reach optical lanes
(SR10) optics (multimode fiber)
Chapter 1 Cisco ASR 9000 Series Line Card Product Overview
shows the line card front panel and connector.
Maximum Distance
10 km
100 m