Installing A Line Card Cable Management Bracket - Cisco ASR 9000 Series Installation Manual

Chapter 2 Installing Line Cards in the Cisco ASR 9000 Series Router

Installing a Line Card Cable Management Bracket

To install a line card cable-management bracket, follow these steps:
Attach an ESD-preventive wrist or ankle strap and follow its instructions for use.
Step 1
Position the cable-management bracket over the front of the line card front panel.
Step 2
Figure 2-43
Step 3 Insert and tighten the captive screw(s) to secure the bracket to the line card
Starting with the port on the line card closest to the bracket, connect each interface cable to the intended
Step 4
port
Cable-Management Bracket Installation and Removal
(Figure 2-42).
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
Line Card Cable Management
(Figure 2-43).
2-67