Cisco ASR 9000 Series Installation Manual page 99

Chapter 2 Installing Line Cards in the Cisco ASR 9000 Series Router
Table 2-3
Table 2-3
CFP Transceiver Module
Product Number
CFP-100G-LR4
CFP-100G-SR10
The dual SC connectors on the optical CFP transceivers support network interface cables with either
Note
Physical Contact (PC) or Ultra-Physical Contact (UPC) flat polished face types. The dual SC connectors
on the optical CFP transceivers do not support network interface cables with an Angle Polished
Connector (APC) polished face type.
Table 2-4
transceivers.
The minimum cabling distance for the optical CFP transceivers is 6.56 feet (2 meters).
Note
Table 2-4
SFP+ Transceiver
Module Model
CFP-100G-LR4
CFP-100G-SR10
CFP-100G-ER4
lists the currently supported types of CFP transceivers.
CFP Transceiver Product Numbers and Descriptions
Transceiver Description
Cisco 100GBASE-LR4 CFP transceiver module for SMF, 1310 nm
window, SC connector
Cisco 100GBASE-SR10 CFP transceiver module for MMF,
1310 nm window, SC connector
lists the port cabling and optical transmit and receive specifications for 100-Gigabit CFP
CFP Transceiver Module Optical Transmit and Receive Specifications
Transceiver Type
100GBASE-LR4,
1310-nm SMF
100GBASE-SR10,
850-nm MMF
100GBASE-ER,
1310-nm SMF
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
Transmit Receive Power
Power (dBm) (dBm)
4.5 per lane 4.5 per lane
(Max) (Max)
–4.3 per lane –10.6 per lane
(Min) (Min)
-1.0 per lane 2.4 per lane
(Max) (Max)
-7.6 per lane –9.5 per lane
(Min) (Min)
2.9 per lane 4.5 per lane
(Max) (Max)
-2.9 per lane –20.9 per lane
(Min) (Min)
Overview
Transmit and Receive
Wavelength (nm)
Four lanes:
1295.6
1300.1
1304.6
1309.1
Ten lanes, 840 to 850 nm
Four lanes:
1295.6
1300.1
1304.6
1309.1
2-45