Cisco ASR 9000 Series Installation Manual page 92

Installing and Removing SFP Modules
Figure 2-21
With the tab still pushed, carefully pull the SFP module from the port as shown in
Step 5
Caution You must disengage the SFP module by pushing on the slide tab before you can pull out the module. If
you pull on the SFP module without disengaging the tab, you can damage the module.
Figure 2-22
Step 6 Place the removed SFP module on an antistatic mat, or immediately place it in a static shielding bag if
you plan to return it to the factory.
Protect your line card by inserting clean SFP module cage covers into the optical module cage when
Step 7
there is no SFP module installed.
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
2-38
Disengaging the Slide Tab
Removing a Slide Tab SFP or SFP+ Module
Chapter 2 Installing Line Cards in the Cisco ASR 9000 Series Router
1
3
5
7
0
2
4
6
Figure 2-22.
9
8