Snmp Configuration - TANDBERG Video Portal Administrator's Manual

SNMP Configuration
SNMP (Simple Network
Management Protocol) is
used for monitoring and
configuring different units
in a network. The Video
Portal's SNMP agent
responds to requests from
SNMP Managers (a PC
program etc.). SNMP traps
are generated by the agent
to inform the manager about
important events.
Select SNMP to access the

SNMP Configuration

pane.
Save. Press Save to activate
new settings.
Table of Trademarks & Patents &
Contents Copyright Disclaimers
D 14074.03
10.2007
Safety/ To Get You Using the
Environmental Up and Going Video Portal
Viewing the Configuring Configuring Maintenance
System Status the Video Portal the Video Portal
29
TANDBERG
TANDBERG
SNMP Mode. The SNMP operation modus can
be set to:
•
On . Turns SNMP On
•
Off . Turns SNMP Off
•
ReadOnly . Do not send SNMP information
to the host
•
TrapsOnly . Only send SNMP information
identified as TRAPS to the host.
SNMP Community name. SNMP Community
names are used to authenticate SNMP
requests. SNMP requests must have this
'password' in order to receive a response from
the SNMP agent in the Video Portal.
The SNMP Community name is case
sensitive!
System contact. Used to identify the system
contact via SNMP tools such as HPOpenView
or TANDBERG Management Suite.
Location. Used to identify system location
via SNMP tools such as HPOpenView or
TANDBERG Management Suite.
Host IP Address (1, 2 and 3). Identifies the
IP-address of the SNMP manager. Up to three
different SNMP trap hosts can be defined.
Your LAN administrator should provide the
correct values for these fields.
Dial Plan
Services
& Upgrade Examples
Video Portal
VIDEO PORTAL
USER GUIDE
USER GUIDE
Contact
Information