Interface Leds - H3C MSR 20 User Manual

150 C 4: F I
HAPTER LEXIBLE
Interface Attributes

Interface LEDs

Interface Cable
C
NTERFACE ARDS
Operation at 1000 Mbps, 100 Mbps, and 10 Mbps, auto-sensing.
■
Half-duplex/full duplex, autosensing
■
The following table describes the interface attributes of the FIC-1GBE/FIC-2GBE:
Table 104 Interface attributes of the FIC-1GBE/FIC-2GBE
Attribute
Connector
Number of connectors
Interface type
Interface standard
Cable type
Operating mode
The following figures show the FIC-1GBE and FIC-2GBE panels.
Figure 172 FIC-1GBE panel
Figure 173 FIC-2GBE panel
The following table describes the LEDs on the FIC-1GBE/FIC-2GBE panel.
Table 105 LEDs on the FIC-1GBE/FIC-2GBE panel
LED
LINK
ACT
FIC-1GBE/FIC-2GBE uses both crossover and straight-through cables for
connection.
FIC-1GBE FIC-2GBE
RJ-45
1 2
MDI/MDIX
802.3, 802.3u, and 802.3ab
Ethernet cable
10/100/1000 Mbps auto-sensing
Half-duplex/full duplex, autosensing
Description
OFF means no link is present; ON
means a link is present.
OFF means no data is being
transmitted or received. Blinking
means data is being transmitted
and/or received.