Live Call Screening Button Assignment - Panasonic KX-TVS75 Installation Manual

1.
Enter Station Programming:
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99]. (Display changes to PITS-PGM Mode.)
2.
Press the code for the mode you want this phone to have.
Hands-Free = 71
Private = 72
Screen output: Hands-Free or Private
3.
Press STORE.
4.
Exit the program mode by Pressing the PROGRAM button.
5.
Repeat these steps at each telephone.
Conditions:
A single-line telephone that is connected to the same extension as a proprietary telephone can
also be used to monitor an incoming message. Be sure that Live Call Screening on the
connected proprietary telephone has been activated. This feature is useful when you are using
a cordless telephone. The handset sounds an alert tone to let you know that a message is being
recorded. To intercept the call, flash the hook.

4.3.4 Live Call Screening Button Assignment

For the Live Call Screening feature to work at an extension, the extension must have an LCS
button on it and the button must be lit at the time of the message. This key must be either a
DSS/BLF or CO key (must have a lamp). Follow the procedure below to assign an LCS button
on an extension. (This is a station level program and should be done at each individual phone.)
1.
Enter Station Programming:
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99]. (Display changes to PITS-PGM Mode.)
2.
Press the desired FLEXIBLE (CO or DSS/BLF) button you want to assign as the LCS
button.
3.
Press [92].
Screen output: LCS
4.
Press STORE.
5.
Repeat these steps at each telephone.
6.
To exit the Station Programming mode, Press the PROGRAM button or lift the handset.
7.
Repeat these steps for each telephone.
Conditions:
INTEGRATING THE VPS WITH THE PANASONIC KX-TD DIGITAL PBX
4.3 COMMON DIGITAL INTEGRATION FEATURES AND SETUP PROCEDURES
None
This button must be assigned and lit for LCS to operate.
To light this, press the button and Press the LCS
password (see Password Assignment).
91