Print All Of The Vps Parameters (Gprn) - Panasonic KX-TVS75 Installation Manual

7.2 UTILITY COMMANDS
Note
"8. Company Greeting" is available for TVS200 only.
2.
Select the item to be restored to the hard disk, then Press RETURN.
To start press 'RETURN'
3.
Press RETURN.
- - - - - - LOAD Start!!
When "CCC" appears, the VPS is ready for loading.
4.
Set the data terminal to the sending (Call) mode (Xmodem). Then enter the backup
filename. Press ENTER. The backup data will be restored to the hard disk.
5.
When the parameter load has been completed, power-off and restart the system.
Note
The data terminal used must be equipped with communications software that supports
the Xmodem file transfer protocol. The command can be cancelled by Typing [\]
before entering the sending mode. Once the sending mode has been selected, use the
cancel command of the communication software being used.

7.2.9 Print All of the VPS Parameters (GPRN)

This command is used to print all VPS parameter settings (output to screen).
Type GPRN, then Press RETURN.
$ GPRN
0: All Parameters
1: Mailbox Setting
2: Class of Service Setting
3: Port Service Setting
4: Service Setting - Auto Attn. Setting
5: Service Setting - Custom Service Setting
6: System Parameter Setting - System Group Assignment
7: System Parameter Setting - Day Service, Holiday, Daylight Saving Time
8: System Parameter Setting - Prompt Setting
9: System Parameter Setting - Others
10: Hardware Setting
11: System Reset Clear Parameter
Please select : =
Note
This command is only valid when in the "ASCII terminal" mode.
146
SYSTEM MAINTENANCE AND TROUBLESHOOTING