Parameters; B3 System Administration - Setting Cos (Class Of Service Parameters - Panasonic KX-TVS75 Installation Manual

B3 SYSTEM ADMINISTRATION - SETTING COS (CLASS OF SERVICE) PARAMETERS
B3 SYSTEM ADMINISTRATION - SETTING COS
(CLASS OF SERVICE) PARAMETERS
The COS - Class of Service parameters define the set of services that are available to
Subscribers. A maximum of 64 (1-64) classes can be specified. A class of service number can
be assigned for each mailbox. More than one Subscriber can share the same class of service.
• COS numbers 1-62 have the same values for each parameter by default.
Note
There is an exception to this. "Authorization of Message Notification" (see Table 47)
for COS number 1 will be set to "Yes" after performing Quick Setup.
• COS number 63 is only available to the Message Manager while COS number 64 is only
available to the System Manager.
To access Class of Service Numbers 1-64, follow the menu path as shown:
System Administration Top Menu - 1 - 2 - COS No. (1-64)
Note
In Tables 47 and 48, sub-parameters are underlined. These sub-parameters can be
assigned only when the corresponding parameter is set to "Yes".
Class of Service Setting
COS Nos. 1-62 (for Subscribers)
To access Class of Service Numbers 1-62 for Subscribers, follow the menu path as
shown:
System Administration Top Menu - 1 - 2 - COS No. (1-62) - 1
200
SYSTEM ADMINISTRATION