en
S
ERVICE
6.5
Biddle control cable composition
en-40
6.4.1 Resetting the temperature cut-out
1. Turn the unit off.
2. Open the unit.
3. Push back the temperature cut-out pin 1.
4. Check unit connections.
5. Close the unit.
6. Check whether fans are working properly.
The control system cable is made up as follows:
•
Connectors are Type 4P4C.
•
Connectors are untwisted, i.e. at both cable ends cores are
connected to the same pin.
C
A
C
OMFORT
IR
URTAIN