Table of Contents
Advertisement
DF M
ANUAL
Manual version 2.0 (26-10-2012)
3.4.2 Automatic temperature control
In automatic mode, the unit measures the air inlet tempera-
ture and automatically selects the required heating setting to
adjust the air temperature to the configured level.
•
Set the required temperature using Buttons 2 and 3
The LEDs display the temperature in a range from 18 °C to
25 °C. This temperature is measured at the unit's air inlet and
may deviate slightly from actual room temperature.
3.4.3 Turning off heating
You can turn off heating to achieve climate separation without
actually heating the air, e.g. if indoor air is being cooled and is
colder than outside.
This can be configured in both manual and automatic modes.
To turn heating off:
•
Press Button 2 until blue LED 7 illuminates.
To turn heating on:
•
Press Button 3: the blue LED turns off and one or more
of the yellow LEDs turns on.
en
O
PERATION
en-29
Advertisement
Table of Contents
