DF M
ANUAL
2.6
Connecting the mains supply
Manual version 2.0 (26-10-2012)
3. Connect the valve to Terminal Block 1 as shown in the
electrical diagram.
4. Open the valve manually using the handle (Position 'MAN').
5. Fill and bleed the system.
6. Check the connections for leaks.
7. Return the handle to its starting position
(Position 'AUTO').
2.6.1 Particulars
For all models:
Warning:
w
The unit must be grounded.
Warning:
w
Connect the unit in accordance with the
applicable local requirements.
For water-heated models and models without heating:
•
The unit can be switched on and off from the power sup-
ply. This requires that the control panel be configured for
this purpose.
•
If the unit has been fitted with a power cable and
plug on delivery:
Ensure that an earthed wall socket is available no farther
than 1.5 m from the connections side of the unit.
en
I
NSTALLATION
en-15