Connecting The Fm Antenna - JVC UX-V9MD Instructions Manual

CAUTION: Make all connections before plugging the System into an AC power outlet.

Connecting the FM Antenna

Rear Panel of the Unit
L
R
Connecting the AM (MW/LW) Antenna
Rear Panel of the Unit
L
R
CAUTION: To avoid noise, keep antennas away
from the System, the connecting cord and the AC
power cord.
OPTICAL
DIGITAL IN
( AUX2 )
R L
OPTICAL
DIGITAL IN
( AUX2 )
R L
Using the Supplied Wire Antenna
Using the Coaxial Type Connector (Not Supplied)
A 75-ohm antenna with coaxial type connector (IEC or DIN45 325)
should be connected to the FM 75-ohm COAXIAL terminal.
If reception is poor, connect the outdoor antenna.
Coaxial cable
Note: Before attaching a 75 ohm coaxial lead (the kind with a
round wire going to an outdoor antenna), disconnect the
supplied FM Wire Antenna.
AM loop antenna (Supplied)
Attach the AM loop to its base by snapping the tabs on the
loop into the slot in the base.
ANTENNA
FM (75 )
COAXIAL
AM EXT
AM LOOP
Turn the loop until you have the best reception.
FM wire antenna (supplied)
FM outdoor antenna
(Not supplied)
3