Common Operations - JVC UX-V9MD Instructions Manual

Common Operations

REMOTE CONTROL RM-RXUV
DIMMER SLEEP
DIMMER
DISPLAY FM MODE TAPE / AUX
DISPLAY
AUTO
PRESET
AHB PRO CD
AHB PRO
PROGRAM RANDOM REPEAT
BASS TREBLE CANCEL
BASS
EDIT
TREBLE
/ TITLE CHARA
UP
SET
DOWN
TUNER
MD
BAND
VOLUME+,–
VOLUME
Turning the Power On and Off
Turning the System On
Press the button.
The display comes on and "HELLO" is displayed once. The
STANDBY/ON indicator lights in green.
The System comes on ready to continue in the mode it was in when
the power was last turned off.
For example, if the last thing you were doing was listening to a
CD, you are now ready to listen to a CD again. If you wish, you
can change to another source.
If you were listening to the Tuner last, the Tuner comes on play-
ing the station it was last set to.
Turning the System Off ——————
Press the button again.
"GOOD BYE" is displayed and the display goes out, except for the
clock display. The STANDBY/ON indicator lights in red.
Some power is always consumed even though power is turned
off (called Standby Mode).
To switch off the System completely, unplug the AC power cord
from the wall outlet. When you unplug the AC power cord, the
clock will be reset to 0:00 after about 20 minutes.
Adjusting the Brightness
(DIMMER)
You can adjust the brightness of the backlighting for the display.
When the System is Turned On ——
To make the brightness of the backlighting darker, press
the DIMMER button on the Remote Control.
To make the brightness brighter, press the DIMMER button
on the Remote Control again.
When the System is Turned Off
(STANDBY MODE) —————————
To turn on the backlighting, press the DIMMER button on the
Remote Control. The brightness is the same as for darker one men-
tioned above.
To turn off the backlighting, press the DIMMER button on the
Remote Control again.
6
9 MD
AHB PRO
CD
——————
STANDBY/ON indicator
PRESET
MD REC TUNING SLEEP CLOCK
CLOCK
TIMER/
VOLUME SNOOZE
AHB PRO
VOLUME+,–
Adjusting the Volume
Press the VOLUME + button to increase the volume or press the
VOLUME – button to decrease it.
You can adjust the volume level between 0 and 50.
CAUTION: DO NOT turn on the System and/or start
playing any source without first setting the VOL-
UME control to minimum, as a sudden blast of
sound could damage your hearing, speakers and/
or headphones.
For private listening
Connect a pair of headphones to the PHONES jack. No sound comes
out of the speakers.
Be sure to turn down the volume before connecting or putting on
headphones.
STANDBY / ON
TAPE / AUX MD
DOWN MULTI CONTROL
PHONES
PHONES
CD
BAND
OPEN / CLOSE
TUNER CD
MD
UP
EJECT