Using External Equipment - JVC UX-V9MD Instructions Manual

Jvc micro component system instructions
Table of Contents

Advertisement

Using External Equipment

Listening to External
Equipment
You can listen to external equipment.
First make sure that the external equipment is properly connect-
ed to the System. (See pages 4-5.)
1. Set the VOLUME control to the minimum
position.
2. Press the TAPE/AUX button.
Each time you press the button, the display changes between
AUX1 and AUX2.
When the "AUX 1 (ANALOG IN)" is selected:
You can use the external equipment connected to the LINE IN
(AUX1) terminals of the System, such as cassette deck, turnta-
ble, etc.
To listen to the external equipment, start playing the exter-
nal equipment.
When the "AUX 2 (DIGITAL IN)" is selected:
You can use the external equipment connected to the OPTICAL
DIGITAL IN (AUX2) terminal of the System, such as CD play-
er, etc.
To listen to the external equipment, start playing the exter-
nal equipment.
3. Start playing the external equipment.
4. Adjust the VOLUME control to the desired
listening level.
5. Apply sound effects, if you wish.
Press the AHB PRO button to reinforce the bass sound.
Press the BASS/TREBLE button on the Remote Control to con-
trol the tone. (See "Tone Control" on page 7.)
To exit TAPE/AUX mode, you will automatically switch out of
TAPE/AUX mode when you select another source.
Note: For operation of the external equipment, refer to its Instruc-
tions.
To record an external music source to an MD, see "Recording
onto an MD" on page 14.
REMOTE CONTROL RM-RXUV
9
MD
DIMMER
SLEEP
DISPLAY
FM MODE TAPE / AUX
TAPE/AUX
AUTO
AHB PRO
PRESET
CD
PROGRAM RANDOM
REPEAT
BASS
TREBLE
CANCEL
EDIT
/ TITLE
CHARA
UP
SET
DOWN
TUNER
MD
CD
BAND
VOLUME
(Stays lit.)
(Stays lit.)
STANDBY / ON
BAND
OPEN / CLOSE
TAPE / AUX
MD
TUNER
CD
DOWN
MULTI CONTROL
UP
PHONES
Recording the System's
source to External Equipment
You can record the System's source to external equipment which is
connected to the LINE OUT terminals of the System, such as cas-
sette deck, etc.
First make sure that the external equipment is properly connect-
ed to the System. (See page 4).
1. Play the System's CD Player, MD Player, or
tune into a station.
The recording level is not affected by the VOLUME level set by
the System. Also it is not affected by the sound effects.
Note: For operation of the external equipment, refer to its Instruc-
tions.
TAPE/AUX
CD
MD
EJECT
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents