Using The Tuner - JVC UX-V9MD Instructions Manual

Using the Tuner

REMOTE CONTROL RM-RXUV 9 MD
DIMMER SLEEP
DISPLAY FM MODE TAPE / AUX
AUTO
PRESET
AHB PRO CD
PROGRAM RANDOM REPEAT
BASS TREBLE CANCEL
EDIT
SET
/ TITLE CHARA
UP
<
SET
DOWN
TUNER
MD CD
BAND
4
VOLUME
You can listen to FM and AM (MW/LW) stations. Stations can be
tuned in manually, automatically, or from preset memory storage.
Before listening to the radio:
• Make sure that both the FM and AM (MW/LW) antennas
are correctly connected. (See page 3).
One Touch Radio
Just press the TUNER BAND button to turn on the System and start
playing the station you were last tuned to.
You can switch from any other sound source to the radio by
pressing the TUNER BAND button.
Tuning In a Station
1. Press the TUNER BAND button.
The Band and Frequency you were last tuned to appear on the
display.
(If the last station was selected using the preset number, the pre-
set number appears first.)
Each time you press the button, the band alternates between FM
and AM (MW/LW).
TUNER
AM BAND FM
(on the Remote Control)
2. Select a station using one of the following
methods.
Manual Tuning
4 ¢
Press the or button on the Unit or the Remote Control
repeatedly to move from frequency to frequency until you find
the station you want.
Auto Tuning
If you press and hold the
Remote Control for one second or more, the frequency changes
down, or up, automatically until a station is found.
Preset Tuning using the Remote Control (Possible
only after presetting stations)
8
STANDBY/ON
FM MODE
AUTO PRESET
PHONES
UP
>
DOWN
TUNER BAND
¢
When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
—————————
BAND
AM
TUNER
(on the Unit)
OR
4 ¢
or button on the Unit or the
OR
CD
BAND
OPEN / CLOSE
TAPE / AUX MD TUNER CD
TUNER BAND
MD
DOWN MULTI CONTROL UP
EJECT
¢
4
Band display, Frequency display,
Preset channel
Select the desired preset number using the UP, DOWN, > and <
button on the Remote Control. After 1 second the display will
show the preset number's band and frequency.
Example: Press the UP button until the preset number 12 "P12"
UP
or
Preset Tuning using the Unit (Possible only after pre-
setting stations)
Press the PRESET TUNING button to select the desired preset
number. Its band and frequency are displayed.
Presetting Stations
You can preset up to 30 FM stations and up to 15 AM (MW/LW)
stations using the Remote Control.
Note: Preset numbers may have been set to factory test frequen-
cies prior to shipment. This is not a malfunction. You can
preset the stations you want into memory by following one
of the presetting methods below.
Manual Presetting
FM
TUNER
BAND
When changing the Band
1. Select a band by pressing the TUNER
BAND button.
2. Press the 4 or ¢ button to tune in a sta-
tion.
3. Press the SET button.
"SET" will blink for 5 seconds.
Within 5 seconds, proceed to the next step.
When the display returns to the one set in STEP 2 after 5 sec-
onds, press the SET button again.
PRESET
TUNING
MD REC
PRESET
TUNING
AHB PRO
FM mode indicators
appears.
DOWN
(After 1 second)
—————————
SET
SET
FM = 30, AM = 15
SLEEP
CLOCK
TIMER/
VOLUME SNOOZE
STORED
SET
UP DOWN
or
(Within 5 seconds)