Connecting The Fm Antenna - JVC UX-V20R/UX-V10 Instructions Manual

CAUTION: Make all connections before plugging the System into an AC power outlet.

Connecting the FM Antenna

Rear Panel of the Unit
Connecting the AM (MW/LW) Antenna
Rear Panel of the Unit
CAUTION:
To avoid noise, keep antennas away from the
System, the connecting cord and the AC power
cord.
Using the supplied Wire Antenna
R L
Using the coaxial type connector
(not supplied)
A 75
should be connected to the FM (75 ) COAXIAL terminal.
L
R
SPEAKERS
IMPEDANCE
MIN 4
If reception is poor, connect the outdoor antenna.
AC IN
Note: Before attaching a 75
AM Loop Antenna (supplied)
R L
Attach the AM loop to its base by snapping the tabs on the loop
L
into the slot in the base.
R
SPEAKERS
IMPEDANCE
MIN 4
AC IN
Turn the loop until you have the best reception.
antenna with coaxial type connector (IEC or DIN 45325)
Coaxial cable
coaxial lead (the kind with a
round wire going to an outdoor antenna), disconnect the
supplied FM Wire Antenna.
ANTENNA
AM EXT
AM LOOP
FM (75 )
COAXIAL
FM Wire Antenna
(supplied)
FM outdoor antenna
(not supplied)
3