Recording Onto An Md - JVC UX-V9MD Instructions Manual

Jvc micro component system instructions
Table of Contents

Advertisement

Recording onto an MD

REMOTE CONTROL RM-RXUV
9
MD
DIMMER
SLEEP
DISPLAY
FM MODE TAPE / AUX
DISPLAY
AUTO
AHB PRO
PRESET
CD
PROGRAM RANDOM
REPEAT
BASS
TREBLE
CANCEL
EDIT
/ TITLE
CHARA
UP
SET
DOWN
#8
MD
TUNER
MD
CD
BAND
VOLUME
Recording onto an MD from any of the sound sources is simple. Just
insert an MD to the Unit, have the source ready, make one or two
settings, and you are ready to record. For each source, the procedure
is a little bit different so we explain each separately. But first, here
are a few things to make your recordings better.
Things To Know Before You Start
Recording —————————————
It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
Carefully read the "Rules of Digital Dubbing" on page
26.
The MD Recorder supports the following sampling frequencies
for digital sources.
For the OPTICAL DIGITAL IN (AUX2): 32 kHz, 44.1 kHz and
48 kHz.
For the CD Player of the Unit: 44.1 kHz.
The recording level, which is the volume at which the new MD
is being made, is automatically set correctly, so it is not affected
by the VOLUME level of the System. Nor it is affected by ad-
justing the sound effects. Thus, during recording you can adjust
the sound you are actually listening to without affecting the re-
cording level.
Note that it takes 10 seconds until the MD REC button becomes
effective after the MD has been inserted.
The accidental erasure prevention knob is provided on the back
of an MD cartridge to prevent accidental erasure or recording.
It must be set to the close position beforehand.
For recording or editing
When you stick an adhesive label onto the MD cartridge, adhere
it securely. If it peels off, ejection trouble, etc. will occur.
To start recording immediately after inserting an MD, it is re-
quired to allow several seconds.
Only stereo recording is possible. (Monaural recording that en-
ables long recording is impossible.)
14
STANDBY / ON
BAND
TAPE / AUX
MD
TUNER
DOWN
MULTI CONTROL
PHONES
#8
CD
7
When the System is in use, the display shows oth-
er items as well.
For simplicity, we show here only the items de-
scribed in this section.
Accidental erasure prevention knob
Open
Close
For protecting erasure
MD REC
CD
OPEN / CLOSE
#¥8
CD
MD
MD
0
UP
EJECT
MD EJECT
7
MD REC indicator
Preparation Before Recording ———
Be sure that the MD is not the Play-only type one.
Be sure that the accidental erasure prevention knob of the MD
cartridge is set to the close position. Otherwise, "DISC
PROTECTED" will appear when you try to record a signal to
the MD.
Be sure that the MD has enough space for recording. If not, car-
ry out ALL ERASE or ERASE function to erase all the tracks
or desired tracks in the MD. (See page 19.) You can check the
recordable remaining time of the MD in Stop mode or during re-
cording by pressing the DISPLAY button.
(See "Checking the Remaining Time of the MD" mentioned on
page 15.)
Standard Recording
You can record any sound source to an MD as follows.
1. Insert an MD with its label side up.
2. Prepare one of the sources.
CD: Use the "CD Synchro Recording" on page 15.
Tuner: Tune in to a station.
AUX1 (LINE IN (AUX1)): Press the TAPE/AUX button on the
Unit or the Remote Control until "AUX 1 ANALOG IN" ap-
pears on the display.
AUX2 (OPTICAL DIGITAL IN (AUX2)): Press the TAPE/
AUX button on the Unit or the Remote Control until "AUX 2
DIGITAL IN" appears on the display.
3. Play the record source selected in step 2.
4. Press the MD REC button on the Unit.
The MD REC indicator lights up and the selected source is re-
corded on the MD.
The track number is incremented by one and it blinks on the
music calendar.
Source playback
When AUX1 or AUX2 is selected as a source, sound synchro
recording takes place. The MD Recorder will automatically
start recording when a signal is input and stop when no signal
continues for more than 30 seconds.
Sound synchro recording may not correctly work if the in-
put noise is large, since it starts after detecting the presence
of signal.
PRESET
MD REC
TUNING
SLEEP
CLOCK
TIMER/
VOLUME
SNOOZE
AHB PRO
Track number, Playing time
Music calendar
Track number exceeding
15 is not displayed.
MD REC

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents