Figure 1-9 Replacing The Cover - Digital Equipment DIGITAL Personal Workstation Upgrade Manual

26. Line up the flanges on the inside of the bottom-left portion of the cover so that they
overlap the edge of the chassis body. (See Figure 1-9.)
27. Slide the cover forward to secure it into place. Fasten the system cover with the three
Ê
thumbscrews provided.
28. Plug in the power cord.
29. Power on the system.
See section A-1 for specific operating system considerations.

Figure 1-9 Replacing the Cover

DIGITAL Personal Workstation Upgrade Guide 1–13
The Upgrade
1
MLO-013605