Figure 1-7 Installing The New Mlb - Digital Equipment DIGITAL Personal Workstation Upgrade Manual

Figure 1-7 Installing the New MLB

25. To replace the speed button for a speed upgrade, you must first remove the front
bezel. Refer to Figure 1-8 and follow these steps:
a) From the top of the workstation, looking down toward the bottom of the front of
the chassis, view the two tabs from the front bezel that hold the bezel in place and
secure it to the chassis. Find both tabs (one on the left and one on the right).
b) Push both tabs toward the center of the workstation to release the top of the bezel.
c) Gently pull the top of the bezel approximately 1 inch away from the top of the
chassis.
d) Gently, but firmly, pull up on the bezel to unhook the bottom bezel mounts.
ML014014
DIGITAL Personal Workstation Upgrade Guide 1–11
The Upgrade