Table of Contents
Advertisement
7. Select device "ATAPI" (This is the new CD-ROM device driver.)
8. Click on "Startup..."
9. Click on "Startup Type" ; "Boot"
10. Click on "OK"
11. Click on "Close"
12. System will reboot.
__________________________ Note _____________________________
It is recommended the following device drivers be updated, using the backup
CD provided, part number QC-06LAA-H8.
____________________________________________________________
•
QLogic SCSI
•
Graphics
•
Sound
•
Ethernet (See Caution)
_________________________ Caution ___________________________
Do not use the default setting "Autosense" in the media type selection menu.
You must select the appropriate media type manually, in this menu.
____________________________________________________________
__________________________ Note _____________________________
Because of a minor problem with the ATAPI Driver, you will see error log
entries in the system log:
"Event ID 22, Source: ATAPI, Type: Error
A conflict has been detected between two drives which claimed overlapping
ID Port Regions. . . "
This error entry can be ignored.
____________________________________________________________
DIGITAL Personal Workstation Upgrade Guide A–3
The Upgrade
Advertisement
Table of Contents
