Removing The Riser Card; Figure 1-2 Removing The Mlb - Digital Equipment DIGITAL Personal Workstation Upgrade Manual

2. Remove the keyboard, mouse, and any other external cables attached to the MLB, and
release the two MLB-retaining clips on top of the MLB. (See Figure 1-2.)
3. Hold onto either end of the MLB as you slide it up and out of the system chassis.
4. Carefully place the MLB onto a static-free, flat surface.

Removing the Riser Card

5. Unplug all cables and option cards.
Because the new riser card comes with an integrated Ultra SCSI controller, the plug-in
disk controller from the old system will be unused.
This extra disk controller may be used for future external storage expansion or the
controller may be discarded.
6. Remove the six screws.
7. Remove riser card.
HINT: Refer to your DIGITAL Personal WorkStation User Guide, EK-ALMIG-SI,
Chapter 4, for illustrations of cable locations and removal.

Figure 1-2 Removing the MLB

DIGITAL Personal Workstation Upgrade Guide 1–5
The Upgrade
ML014655