Install New Mounting Brackets - Digital Equipment MicroVAX 3100 Model 30 Upgrade Instructions

Install New Mounting Brackets

Remove the mounting brackets from all the
drives you are upgrading, unless you are
upgrading an RZ23L or RZ24 drive that has
the support plate shown below.
To attach the support plate (from the acces-
sory kit) to your drives:
1. Place the metal support plate on the disk
drive as shown.
2. Screw the four rubber grommets into
the plate and the drive until the plate is
secure.
Rubber
Grommets
Metal Support
Plate
MLO-010588