Table of Contents
Advertisement
Rotate the knob to select from channel 1 to channel 16.
﹡Radio On-Off/Volume Control Knob
Rotate the knob clockwise to turn the radio on, and rotate the knob fully counter-clockwise
until a "click" is heard to turn the radio off.
Turn the knob clockwise to increase the volume, or counter-clockwise to decrease the
volume.
﹡LED Indicator
The table below explains the functions of the LEDs and beeps.
Wired Clone
Source radio: Turn the source radio on
while holding down the PTT and SK2 keys.
Target
On-Off/Volume Control knob clockwise to
turn the target radio on.
Source radio (power on the target radio and
connect the cloning cable, and then press
the PTT key of the source radio to initiate
cloning.)
Target radio
Wireless Clone Turn on both the source radio and target
radio while holding down the PTT and SK1
keys. Both radios are required to be on the
same channel for cloning.
Source radio (turn on both the source radio
and target radio while holding down the
PTT and SK1 keys, and then press the
PTT key of the source radio while both
radios are on the same channel to initiate
cloning.)
radio:
Rotate
the
The LED flashes orange twice.
Radio
1)
The LED solidly glows red
during cloning;
2)
The LED goes out when
cloning is finished;
3)
The LED flashes red when
cloning fails.
1)
The LED solidly glows green
during cloning;
2)
The LED goes out when
cloning is finished.
The LED flashes orange once.
The LED solidly glows red during
cloning.
9
Advertisement
Table of Contents
