Basic Operations; Turn On The Power; Select The Source To Play; Adjust The Volume - JVC RX-E100SL Instructions Manual

Basic Operations

This manual mainly explains operations using the buttons and controls on the front panel. You can also use the buttons on the remote
control if they have the similar names (or marks) as those on the front panel.
If operations using the remote control are different from those using the front panel, they are then explained.
• You can also see "Mastering Remote Operations" on page 32.
STANDBY lamp
STANDBY
POWER
D I G I T A L
S U R R O U N D
1
1

Turn On the Power

Press POWER (or AUDIO of the POWER buttons on the remote
control).
The STANDBY lamp goes off. The name of the
current source (or station frequency) appears on
the display.
Current volume level is shown here
L R
LPCM
DGTL AUTO
Current source name appears
To turn off the power (into standby)
Press POWER (or AUDIO) again.
The STANDBY lamp lights up.
A small amount of power is consumed in standby
mode. To turn the power off completely, unplug
the AC power cord.
2
S
elect the Source to Play
Press one of the source selecting buttons.
DVD
DVD TV VCR
DVD : Select the DVD player.
TV
: Select the TV sound.
VCR : Select the VCR.
CD : Select the CD player.
FM : Select an FM broadcast.
AM : Select an AM broadcast.
8
RX-E100
TV DILECT
ANALOG L C R PRO LOGIC
CONTROL
LPCM DSP
SUBWFR LFE
DOLBY D DGTL AUTO
LS S RS
DTS INPUT ATT
SETTING ADJUST MEMORY
DVD DVD TV
D I G I T A L
STANDBY
POWER
VOL
STANDBY
POWER
CD FM AM
Display
HOME THEATER RECEIVER
SLEEP TUNED ST AUTO MUTING
MH Z
KH Z
INPUT SURROUND
VOL
ANALOG/DIGITAL ON/OFF
INPUT ATT
VCR CD FM AM
2
Note:
When you have connected some digital source components using the
digital terminals (see page 6), see "Basic Settings" on pages 10 and
11 to finish the digital input terminal setting and digital input mode
setting correctly before use.
3
A
djust the Volume
To increase the volume, press and hold
MASTER VOLUME
remote control).
To decrease the volume, press and hold
MASTER VOLUME
remote control).
CAUTION:
Always set the volume to the minimum before starting any source. If
the volume is set at its high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
Notes:
• The volume level can be adjusted within the range of "0" (minimum)
to "70" (maximum).
• Each time you press the button, the volume level changes by 2
steps from "0" (minimum) to "14" and by 1 step from "14" to "70"
(maximum).
DSP
MODE
MASTER VOLUME
3
(or VOLUME + on the
MASTER VOLUME
(or VOLUME – on the