Removing And Installing The Bezel Air Filter - IBM eServer BladeCenter T8720 Installation And User Manual

Removing and installing the bezel air filter

The air filter is installed behind the front bezel of the BladeCenter T unit.
Note:
v Read "Option installation guidelines" on page 16.
v Read "Safety" on page vii.
v Read "Handling static-sensitive devices" on page 17.
Complete the following steps to replace the front bezel air filter in the BladeCenter
T unit:
1. Remove the bezel from the front of the BladeCenter T unit (see "Removing the
2. Place the bezel front-side down on a work surface.
3. Remove the air-filter retainer by pulling the retainer upwards and off the
4. Remove the old air filter from the bezel frame.
5. Remove the new air filter from its packaging.
28
BladeCenter T Types 8720 and 8730: Installation and User's Guide
Retainer
Air filter
Bezel
bezel assembly" on page 27 for instructions).
ball-stud fasteners on the bezel.
C M
M
1
C M
M
2
ES D