York Fitness anniversary x201 Owner's Manual page 9

6. Attach the footplates mount tube
1. Remove the bracket at the back of the footplate mount tube (keep these nuts and bolts safe as you'll
need them to re-attach it later on)
2. Attach the same bracket to the crank arm using the fixing shown
3. Re- attach the footplate mount tube to the bracket using the nuts and bolts you previously removed
4. Complete this for both sides
37
10
10
12
104
8 11
7. Connect the upper and lower moving handlebars
1. Slide the lower moving handlebar up
into the tube of the upper moving
handlebar
2. Choose a height adjustment hole
and secure in position with the pull
plunger
3. Repeat for the other side, making sure
to choose the height adjustment hole
in the same position
44
FIXINGS: FIXINGS:
Part
No.
10
x 4
Part
No.
12
x 2
Part
No.
37
x 2
Part
No.
8
x 2
Part
No.
11
x 2
Part
No.
104
x 2
FIXINGS: FIXINGS:
Part
No.
44
x 2
9