Reset Functions; Special Functions - Robe Color Wash 575E AT User Manual

program and the 3 free programs,each up to 99 steps.Each program step has a step time.
Step time-the time,during which effects last in the current step.
Procedure:
1. Select the program you want to edit ("Program 1" - "Program 3") and press [ENTER].
2. Select "Edit Steps" menu and press [ENTER].
3. Select the desired program step ("Step 01" - "Step 99") and press [ENTER].
4 Select the desired item and press [ENTER].Now you can edit DMX value for selected item:
"Pan"- a coarse pan,value 0-55
"Tilt" - a coarse tilt,value 0-55
"Pan/Tilt Speed " - a speed of pan/tilt movement,value 0-55
"Spec. Func." - a special functions, lamp on/off,reset,value 0-55
"Pan/Tilt Macro" - a pan/tilt macro,value 0-55
"P./T.Macro Speed" - a pan/tilt macro speed,value 0-55
"Colour Wheel" - a colour wheel ,value 0-55
"Cyan" - a cyan, value 0-55
"Magenta" - a magenta, value 0-55
"Yelow" - an yellow, value 0-55
"Conversion Filter" - a conversion temperature filter, value 0-255
"CMY Colour Macro" - a CMYcolour macro, value 0-55
"Effect Speed" - a effect speed, value 0-55
"CMY+CTF speed" - a CMY and CTO filter,value 0-255
"Effect Wheel " - an effect wheel, value 0-55
"Effect Indexing" - a beam shaper rotation,value 0-55
"Zoom" - a zoom,value 0-55
"Shutter/Strobe" - a shutter and strobe,value 0-55
"Dimmer" - a dimmer intensity-coarse ,value 0-55
5. Select "Save" or "Save and Copy" and press [Enter] to confirm adjusted values:
"Save" - saving the current prog. step
"Save and Copy" - saving and copying the current prog. step to the next prog. step .
6. Go on next prog. step and repeat this procedure (steps 4 and 5).
After creation the program,you can simply reduced its length (by changing the start/end steps) using the "Start
Step" and "End Step" menu.

8.8 Reset functions

The ColorWash 575E AT can be reset totally or by function modules.Select relevant function to run a reset:
Reset All --- This function enables the fixture to index all effects and return to their standard positions.
Pan/Tilt --- This function resets pan and tilt.
Colour System --- This function resets colour wheels.
Zoom/Effect wheel --- This function resets zoom and effect wheel.
Dimmer/Strobe --- This function resets dimmer/strobe module.

8.9 Special functions

Use this menu for special services like adjusting lamp or adjusting effects.
Lamp Adjustment --- This function can be used when you make the fine adjustment of the lamp.If you select
this function,all effects will be canceled,shutter will be opened and the dimmer intensity will be set onto 00%.By
using the options "PAn, Tilt, Zoom" you can aim the light at a flat surface (wall) and perform the fine lamp
adjustment.
Effect Adjustment --- By this function you can calibrate and adjust the effects to their standard/right positi-
ons.Disconect the DMX controller from the fixture and select "DMX Values" menu.The display shows step by
step effects by which you can adjust the fixture to the required position before the function calibration. When
the positioning is finished ,select "Calibrate Values" and press [ENTER]:
. Calibration via the control board
Select desired effect, press [ENTER] and adjust its right value (0 - 255). This can be repeated for each calibred
effect if it is required. When the calibration is finished, it is necessary to use the "Save and Reset" function to
write the calibration values to the memory and to make a reset in order to check the newly adjusted positions
of the calibrated effects.
7